Pinnacle Engineering provides licensed Architect and Professional Engineer (PE) stamps for residential, commercial, and industrial projects throughout Oregon. Our permit sets are prepared to meet the Oregon Building Code (IBC-based) and local Authority Having Jurisdiction (AHJ) amendments for cities and counties statewide.
Whether you need structural calculations, architectural plans for plan check, civil site grading, or full MEP coordination, we deliver code-compliant documents ready for Oregon building department submittal.
Oregon adopted building & residential codes
Wind, snow, seismic & flood load design
NEC, IMC, IPC & energy code compliance
Fast turnaround with electronic stamps
Oregon adopts model building codes based on the International Codes (I-Codes) with state-specific amendments. The tables below summarize the primary codes used for permit drawings and PE-stamped calculations.
| Code / Standard | Application |
|---|---|
| Oregon Building Code Based on IBC | Commercial & multi-family construction; occupancy, egress, fire-resistance, accessibility |
| Oregon Residential Code Based on IRC | One- and two-family dwellings & townhouses |
| Oregon Fire Code Based on IFC | Fire protection systems, hazardous materials, fire department access |
| IBC Chapter 11 / ANSI A117.1 | Accessibility for public accommodations & commercial buildings |
| NFPA 101 (Life Safety Code) Where adopted | Means of egress, occupancy classification & fire protection |
Oregon adopts the International Building Code (IBC) with state-specific amendments. Local AHJ amendments may apply by city or county.
| Code / Standard | Application |
|---|---|
| IBC — Site & Grading (Ch. 18) | Site development, retaining walls, exterior walls & grading |
| Local Grading Ordinances | County/city grading permits, erosion control & cut/fill limits |
| NPDES Stormwater EPA / state program | Construction & post-construction stormwater BMPs |
| State DOT Standards | Driveway connections, encroachment permits & transportation |
| FEMA Floodplain (NFIP) | Flood zone compliance & elevation certificates |
Civil deliverables include site plans, utility plans, drainage calculations, and erosion control per Oregon AHJ checklists.
| Code / Standard | Application |
|---|---|
| IBC Chapter 16 | Structural design requirements — loads, materials, systems |
| ASCE 7 7-16 or 7-22 | Minimum design loads: dead, live, wind, snow, rain, seismic, flood |
| ACI 318 | Structural concrete design & detailing |
| AISC 360 | Structural steel buildings |
| NDS (AWC) | Wood construction — sawn lumber, glulam, shear walls |
| TMS 402/602 | Masonry structures |
PE-stamped structural calculations per Oregon Building Code and referenced ASCE 7 load combinations are required for most commercial projects.
| Code / Standard | Application |
|---|---|
| Oregon Electrical Code Based on NEC (NFPA 70) | Wiring, panels, grounding, EV charging |
| Oregon Mechanical Code Based on IMC | HVAC, ventilation, exhaust, refrigeration & duct systems |
| Oregon Plumbing Code Based on IPC | Water supply, drainage, venting, gas piping & fixtures |
| Oregon Energy Conservation Code Based on IECC | Energy efficiency — envelope, lighting, mechanical compliance |
| NFPA 13 / 72 / 101 | Referenced standards for sprinklers, fire alarm & life safety |
MEP permit sets must comply with Oregon energy documentation requirements and local utility provider standards.
Tell us about your Oregon project and our licensed team will provide a quote for permit-ready drawings, structural calculations, or full multidisciplinary engineering support.
Call Us Now
Email Us Now