Pinnacle Engineering provides licensed Architect and Professional Engineer (PE) stamps for residential, commercial, and industrial projects throughout New York. Our permit sets are prepared to meet the New York State Uniform Fire Prevention and Building Code for cities and counties statewide.
Whether you need structural calculations, architectural plans for plan check, civil site grading, or full MEP coordination, we deliver code-compliant documents ready for New York building department submittal.
NYS Building, Fire, Energy & Fuel Gas Codes
Separate NYC Building Code where applicable
ASCE 7 northern climate loads
Fast turnaround with electronic stamps
New York State uses the Uniform Code (based on I-Codes). New York City has its own NYC Building Code. We prepare submittals for both state and NYC jurisdictions.
| Code / Standard | Application |
|---|---|
| NYS Building Code Based on IBC | Commercial & multi-family construction statewide |
| NYS Residential Code Based on IRC | One- and two-family dwellings outside NYC |
| NYC Building Code Title 28 | All construction within the five boroughs |
| NYS Fire Code Based on IFC | Fire protection & hazardous materials |
| NYS Energy Conservation Code | Energy compliance & stretch code (where adopted) |
New York adopts the International Building Code (IBC) with state-specific amendments. Local AHJ amendments may apply by city or county.
| Code / Standard | Application |
|---|---|
| IBC — Site & Grading (Ch. 18) | Site development, retaining walls, exterior walls & grading |
| Local Grading Ordinances | County/city grading permits, erosion control & cut/fill limits |
| NPDES Stormwater EPA / state program | Construction & post-construction stormwater BMPs |
| State DOT Standards | Driveway connections, encroachment permits & transportation |
| FEMA Floodplain (NFIP) | Flood zone compliance & elevation certificates |
Civil deliverables include site plans, utility plans, drainage calculations, and erosion control per New York AHJ checklists.
| Code / Standard | Application |
|---|---|
| IBC Chapter 16 | Structural design requirements — loads, materials, systems |
| ASCE 7 7-16 or 7-22 | Minimum design loads: dead, live, wind, snow, rain, seismic, flood |
| ACI 318 | Structural concrete design & detailing |
| AISC 360 | Structural steel buildings |
| NDS (AWC) | Wood construction — sawn lumber, glulam, shear walls |
| TMS 402/602 | Masonry structures |
NYC requires separate PE/RA registration and DOB filing. Upstate NY projects follow NYS code with heavy snow and frost depth considerations.
| Code / Standard | Application |
|---|---|
| New York Electrical Code Based on NEC (NFPA 70) | Wiring, panels, grounding, EV charging |
| New York Mechanical Code Based on IMC | HVAC, ventilation, exhaust, refrigeration & duct systems |
| New York Plumbing Code Based on IPC | Water supply, drainage, venting, gas piping & fixtures |
| New York Energy Conservation Code Based on IECC | Energy efficiency — envelope, lighting, mechanical compliance |
| NFPA 13 / 72 / 101 | Referenced standards for sprinklers, fire alarm & life safety |
MEP permit sets must comply with New York energy documentation requirements and local utility provider standards.
Tell us about your New York project and our licensed team will provide a quote for permit-ready drawings, structural calculations, or full multidisciplinary engineering support.
Call Us Now
Email Us Now