Pinnacle Engineering provides licensed Architect and Professional Engineer (PE) stamps for residential, commercial, and industrial projects throughout New Mexico. Our permit sets are prepared to meet the New Mexico Building Code (IBC-based) and local Authority Having Jurisdiction (AHJ) amendments for cities and counties statewide.
Whether you need structural calculations, architectural plans for plan check, civil site grading, or full MEP coordination, we deliver code-compliant documents ready for New Mexico building department submittal.
New Mexico adopted building & residential codes
Wind, snow, seismic & flood load design
NEC, IMC, IPC & energy code compliance
Fast turnaround with electronic stamps
New Mexico adopts model building codes based on the International Codes (I-Codes) with state-specific amendments. The tables below summarize the primary codes used for permit drawings and PE-stamped calculations.
| Code / Standard | Application |
|---|---|
| New Mexico Building Code Based on IBC | Commercial & multi-family construction; occupancy, egress, fire-resistance, accessibility |
| New Mexico Residential Code Based on IRC | One- and two-family dwellings & townhouses |
| New Mexico Fire Code Based on IFC | Fire protection systems, hazardous materials, fire department access |
| IBC Chapter 11 / ANSI A117.1 | Accessibility for public accommodations & commercial buildings |
| NFPA 101 (Life Safety Code) Where adopted | Means of egress, occupancy classification & fire protection |
New Mexico adopts the International Building Code (IBC) with state-specific amendments. Local AHJ amendments may apply by city or county.
| Code / Standard | Application |
|---|---|
| IBC — Site & Grading (Ch. 18) | Site development, retaining walls, exterior walls & grading |
| Local Grading Ordinances | County/city grading permits, erosion control & cut/fill limits |
| NPDES Stormwater EPA / state program | Construction & post-construction stormwater BMPs |
| State DOT Standards | Driveway connections, encroachment permits & transportation |
| FEMA Floodplain (NFIP) | Flood zone compliance & elevation certificates |
Civil deliverables include site plans, utility plans, drainage calculations, and erosion control per New Mexico AHJ checklists.
| Code / Standard | Application |
|---|---|
| IBC Chapter 16 | Structural design requirements — loads, materials, systems |
| ASCE 7 7-16 or 7-22 | Minimum design loads: dead, live, wind, snow, rain, seismic, flood |
| ACI 318 | Structural concrete design & detailing |
| AISC 360 | Structural steel buildings |
| NDS (AWC) | Wood construction — sawn lumber, glulam, shear walls |
| TMS 402/602 | Masonry structures |
PE-stamped structural calculations per New Mexico Building Code and referenced ASCE 7 load combinations are required for most commercial projects.
| Code / Standard | Application |
|---|---|
| New Mexico Electrical Code Based on NEC (NFPA 70) | Wiring, panels, grounding, EV charging |
| New Mexico Mechanical Code Based on IMC | HVAC, ventilation, exhaust, refrigeration & duct systems |
| New Mexico Plumbing Code Based on IPC | Water supply, drainage, venting, gas piping & fixtures |
| New Mexico Energy Conservation Code Based on IECC | Energy efficiency — envelope, lighting, mechanical compliance |
| NFPA 13 / 72 / 101 | Referenced standards for sprinklers, fire alarm & life safety |
MEP permit sets must comply with New Mexico energy documentation requirements and local utility provider standards.
Tell us about your New Mexico project and our licensed team will provide a quote for permit-ready drawings, structural calculations, or full multidisciplinary engineering support.
Call Us Now
Email Us Now