Pinnacle Engineering provides licensed Architect and Professional Engineer (PE) stamps for residential, commercial, and industrial projects throughout Florida. Our permit sets are prepared to meet the Florida Building Code (FBC) for cities and counties statewide.
Whether you need structural calculations, architectural plans for plan check, civil site grading, or full MEP coordination, we deliver code-compliant documents ready for Florida building department submittal.
Florida Building Code — unified statewide code
HVHZ & wind-borne debris compliance
FEMA & coastal flood zone design
Fast turnaround with electronic stamps
Florida uses a unified Florida Building Code (FBC) based on I-Codes with extensive wind and flood provisions. The tables below summarize key codes for Florida permit submittals.
| Code / Standard | Application |
|---|---|
| Florida Building Code (FBC) Building Volume | Commercial, multi-family & residential construction statewide |
| FBC — Residential | One- and two-family dwellings (based on IRC) |
| Florida Fire Prevention Code | Fire protection, hazardous materials & life safety |
| Florida Accessibility Code | Accessibility for public accommodations |
| FEMA / Flood Provisions FBC Ch. 16 | Coastal & flood zone construction requirements |
Florida adopts the International Building Code (IBC) with state-specific amendments. Local AHJ amendments may apply by city or county.
| Code / Standard | Application |
|---|---|
| IBC — Site & Grading (Ch. 18) | Site development, retaining walls, exterior walls & grading |
| Local Grading Ordinances | County/city grading permits, erosion control & cut/fill limits |
| NPDES Stormwater EPA / state program | Construction & post-construction stormwater BMPs |
| State DOT Standards | Driveway connections, encroachment permits & transportation |
| FEMA Floodplain (NFIP) | Flood zone compliance & elevation certificates |
Civil deliverables include site plans, utility plans, drainage calculations, and erosion control per Florida AHJ checklists.
| Code / Standard | Application |
|---|---|
| FBC Chapter 16 | Structural design — wind, flood & impact loads |
| ASCE 7-22 | Wind speeds up to 180+ mph in HVHZ; hurricane exposure categories |
| ACI 318 | Structural concrete — including coastal exposure |
| AISC 360 | Structural steel buildings |
| NDS (AWC) | Wood construction with wind uplift connectors |
| TMS 402/602 | Masonry — reinforced for high wind zones |
Florida requires rigorous wind design in High-Velocity Hurricane Zones (HVHZ) including Miami-Dade and Broward counties. Product approval (FL #) is required for many building components.
| Code / Standard | Application |
|---|---|
| Florida Building Code — Electrical Based on NEC | Wiring, panels, surge protection & generator connections |
| Florida Building Code — Mechanical Based on IMC | HVAC, ventilation & hurricane-rated equipment |
| Florida Building Code — Plumbing Based on IPC | Water supply, drainage & backflow prevention |
| Florida Energy Conservation Code | Energy efficiency & blower door testing |
| NFPA 13 / 72 | Fire sprinkler & alarm systems |
MEP permit sets must comply with Florida energy documentation requirements and local utility provider standards.
Tell us about your Florida project and our licensed team will provide a quote for permit-ready drawings, structural calculations, or full multidisciplinary engineering support.
Call Us Now
Email Us Now