Pinnacle Engineering provides licensed Architect and Professional Engineer (PE) stamps for residential, commercial, and industrial projects throughout Arizona. Our permit sets are prepared to meet the Arizona Building Code (IBC-based) and local Authority Having Jurisdiction (AHJ) amendments for cities and counties statewide.
Whether you need structural calculations, architectural plans for plan check, civil site grading, or full MEP coordination, we deliver code-compliant documents ready for Arizona building department submittal.
Arizona adopted building & residential codes
Wind, snow, seismic & flood load design
NEC, IMC, IPC & energy code compliance
Fast turnaround with electronic stamps
Arizona adopts model building codes based on the International Codes (I-Codes) with state-specific amendments. The tables below summarize the primary codes used for permit drawings and PE-stamped calculations.
| Code / Standard | Application |
|---|---|
| Arizona Building Code Based on IBC | Commercial & multi-family construction; occupancy, egress, fire-resistance, accessibility |
| Arizona Residential Code Based on IRC | One- and two-family dwellings & townhouses |
| Arizona Fire Code Based on IFC | Fire protection systems, hazardous materials, fire department access |
| IBC Chapter 11 / ANSI A117.1 | Accessibility for public accommodations & commercial buildings |
| NFPA 101 (Life Safety Code) Where adopted | Means of egress, occupancy classification & fire protection |
Arizona adopts the International Building Code (IBC) with state-specific amendments. Local AHJ amendments may apply by city or county.
| Code / Standard | Application |
|---|---|
| IBC — Site & Grading (Ch. 18) | Site development, retaining walls, exterior walls & grading |
| Local Grading Ordinances | County/city grading permits, erosion control & cut/fill limits |
| NPDES Stormwater EPA / state program | Construction & post-construction stormwater BMPs |
| State DOT Standards | Driveway connections, encroachment permits & transportation |
| FEMA Floodplain (NFIP) | Flood zone compliance & elevation certificates |
Civil deliverables include site plans, utility plans, drainage calculations, and erosion control per Arizona AHJ checklists.
| Code / Standard | Application |
|---|---|
| IBC Chapter 16 | Structural design requirements — loads, materials, systems |
| ASCE 7 7-16 or 7-22 | Minimum design loads: dead, live, wind, snow, rain, seismic, flood |
| ACI 318 | Structural concrete design & detailing |
| AISC 360 | Structural steel buildings |
| NDS (AWC) | Wood construction — sawn lumber, glulam, shear walls |
| TMS 402/602 | Masonry structures |
PE-stamped structural calculations per Arizona Building Code and referenced ASCE 7 load combinations are required for most commercial projects.
| Code / Standard | Application |
|---|---|
| Arizona Electrical Code Based on NEC (NFPA 70) | Wiring, panels, grounding, EV charging |
| Arizona Mechanical Code Based on IMC | HVAC, ventilation, exhaust, refrigeration & duct systems |
| Arizona Plumbing Code Based on IPC | Water supply, drainage, venting, gas piping & fixtures |
| Arizona Energy Conservation Code Based on IECC | Energy efficiency — envelope, lighting, mechanical compliance |
| NFPA 13 / 72 / 101 | Referenced standards for sprinklers, fire alarm & life safety |
MEP permit sets must comply with Arizona energy documentation requirements and local utility provider standards.
Tell us about your Arizona project and our licensed team will provide a quote for permit-ready drawings, structural calculations, or full multidisciplinary engineering support.
Call Us Now
Email Us Now